13
Figure 27 Figure 28 Figure 29
Figure 30
6.3 rear discharge into grass catcher
WARNING: Operate only with a stopped motor.
To return back to normal mowing, remove the mulching wedge and the side discharge accessory and store
them for later usage.
7. OPERATING INSTRUCTIONS
7.1 BEFORE STARTING
7.1.1 Adding oil
Be sure to put oil in the engine before starting. Use a clean and high-quality oil SAE30 and API.SG, SH or SJ
classification.
Use 4-stroke motor oil that meets or exceeds the requirements
for API service classification SH, SJ, or equivalent. Always
check the API service label on the oil container to be sure it
includes the letters SH, SJ, or equivalent.
SAE 10W-30 is recommended for general use. Other
viscosities shown in the chart may be used when the average
temperature in your area is within the indicated range.
Engine oil capacity: 0.6 l
7.1.2 Oil level check
CAUTION: This engine is delivered without oil. Starting
the engine without oil will destroy it.
locking mechanism
To Next Page
Loading...
Need help?
General
