To Next PageTo Next PageWhat to do if Gardol Trimmer blade cutter is running hot?
If the blade cutter of your Gardol Trimmer is running hot, it could be due to a dull blade. Consider having the blade sharpened. It may also be caused by a dent, in which case you should have the blade inspected or overhauled. Insufficient lubrication can also cause the blade to overheat, so try applying lubricant spray.
Lists and illustrates all components of the hedge trimmer.
Explains the meaning of various symbols used on the tool and in the manual.
Guidelines for safe work environment, electrical precautions, and PPE.
Best practices for operating the tool and its maintenance.
Specific safety guidelines tailored for operating hedge trimmers.
Instructions regarding maintenance and repair by qualified personnel.
Preparatory steps and checks before operating the pole trimmer.
Specific precautions and guidance for using the telescopic feature.
Step-by-step instructions for assembling the telescopic hedge trimmer.
How to adjust the angle of the cutting head.
How to extend or shorten the pole for optimal reach.
Guidance on connecting the tool to power and using a circuit breaker.
How to start/stop the tool and attach the shoulder strap.
Instructions on how to use the equipment for trimming hedges.
Procedures for cleaning, lubricating, and maintaining the hedge trimmer.
Instructions for storing the hedge trimmer indoors and safely.
Solutions for common problems like unit not running or excessive noise.
Details the warranty period, terms, and exclusions for the product.
General