EasyManua.ls Logo

Garland Master 200 User Manual

Garland Master 200
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Part # 260BGL Rev B (10/12/11) Page 1
Users are cautioned that maintenance and repairs must be performed by a Garland authorized service agent
using genuine Garland replacement parts. Garland will have no obligation with respect to any product that has been
improperly installed, adjusted, operated or not maintained in accordance with national and local codes or installation
instructions provided with the product, or any product that has its serial number defaced, obliterated or removed,
or which has been modified or repaired using unauthorized parts or by unauthorized service agents.
For a list of authorized service agents, please refer to the Garland web site at http://www.garland-group.com.
The information contained herein, (including design and parts specifications), may be superseded and is subject
to change without notice.
Manufactured by
CLEVELAND RANGE
1333 East 179th Street, Cleveland, Ohio 44110
USA
Enodis UK LTD.
Swalloweld Way, Hayes, Middlesex UB3 1DQ ENGLAND
Telephone: 081-561-0433
Fax: 081-848-0041
Part # 260BGL Rev B (10/12/11) © 2011 Garland Commercial Ranges, LTD.
FOR YOUR SAFETY:
DO NOT STORE OR USE GASOLINE
OR OTHER FLAMMABLE VAPORS OR
LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER
APPLIANCE
WARNING:
IMPROPER INSTALLATION, ADJUSTMENT,
ALTERATION, SERVICE OR MAINTENANCE
CAN CAUSE PROPERTY DAMAGE, INJURY,
OR DEATH. READ THE INSTALLATION,
OPERATING AND MAINTENANCE
INSTRUCTIONS THOROUGHLY
BEFORE INSTALLING OR
SERVICING THIS EQUIPMENT
INSTALLATION AND
OPERATION MANUAL
THE MASTER” HALF SIZE
ELECTRIC
CONVECTION OVEN
PLEASE READ ALL SECTIONS OF THIS MANUAL
AND RETAIN FOR FUTURE REFERENCE.
THIS PRODUCT HAS BEEN CERTIFIED AS
COMMERCIAL COOKING EQUIPMENT AND
MUST BE INSTALLED BY PROFESSIONAL
PERSONNEL AS SPECIFIED.
INSTALLATION AND ELECTRICAL CONNECTION
MUST COMPLY WITH CURRENT CODES:
IN CANADA - THE CANADIAN ELECTRICAL
CODE PART 1 AND / OR LOCAL CODES.
IN USA – THE NATIONAL ELECTRICAL CODE
ANSI / NFPA – CURRENT EDITION.
ENSURE ELECTRICAL SUPPLY CONFORMS WITH
ELECTRICAL CHARACTERISTICS SHOWN ON
THE RATING PLATE.
GARLAND COMMERCIAL RANGES, LTD.
1177 Kamato Road, Mississauga, Ontario L4W 1X4
CANADA
Phone: 905-624-0260
Fax: 905-624-5669
Enodis UK LTD.
Swalloweld Way, Hayes, Middlesex UB3 1DQ ENGLAND
Telephone: 081-561-0433
Fax: 081-848-0041
Question and Answer IconNeed help?

Do you have a question about the Garland Master 200 and is the answer not in the manual?

Garland Master 200 Specifications

General IconGeneral
BrandGarland
ModelMaster 200
CategoryConvection Oven
LanguageEnglish

Summary

Important Information

Health and Environmental Precautions

Safety warnings regarding chemicals, cancer risks, and airborne particles.

Dimensions and Specifications

Introduction

Rating Plate

Location and importance of the unit's rating plate for service.

Power Failure

Procedure to follow in case of a power outage.

Installation Considerations

Clearances, caster brakes, and double deck model setup.

Installation

Ventilation

Importance of proper airflow and avoiding obstructions.

Electrical Connections

Guidelines for wiring and power supply compliance.

Operating Instructions

Master 200 Control Panel Overview

Explains the main control functions and indicators.

Operating Procedures

Details fan speed, cool down, temperature, and timer usage.

Performance Recommendations and General Safety Precautions

Problem/Solutions

Cooking Guide

Cleaning and Maintenance

Break-In Period

Initial setup and cleaning procedure for a new oven.

Exterior Cleaning

Instructions for cleaning the oven's outer surfaces.

Interior Cleaning

Procedures for cleaning the oven cavity, racks, and guides.

Fan Area Maintenance

Preventive maintenance for the fan area, especially with foil use.

Motor Care

Guidelines for maintaining the oven's motor.

Related product manuals