Need help?Do you have a question about the Garmin GPS 12XL and is the answer not in the manual?
Details user risks, FCC compliance, and warnings regarding operation, interference, and unauthorized modifications.
Guides on marking the current position, naming the waypoint 'HOME', and selecting a symbol.
Explains how to select a destination waypoint and start navigation using the GOTO function.
Explains how sky view and signal strength bars indicate satellite visibility, quality, and position fix status.
Details the position averaging function to reduce error and how to save the averaged position as a waypoint.
Guides on creating new waypoints by entering position coordinates manually.
Explains how to create new waypoints using bearing and distance from existing waypoints.
Explains the MOB function for quickly marking and setting a course to a specific position.
Details track log options: Off, Fill, and Wrap, and how to set them up for TracBack.
Guides on clearing the track log and defining a starting point for a TracBack route.
Details creating and storing up to 20 routes with 30 waypoints each, and using function fields.
Explains how to activate a route for navigation and invert its sequence.
Explains how to perform a GOTO to a specific waypoint within an active route.
Describes the Compass Page, providing directional guidance with a rotating compass display.
Details the Highway Page for steering guidance, emphasizing course deviation on a graphic highway.
Explains how the Highway Page shows course deviation and arrival at destination.
Guides on using the map cursor to mark new waypoints or set GOTO destinations directly from the Map Page.
Explains managing track log data, including turning it on/off and selecting recording methods.
To Next Page
General
