Garmin GSA 81 - User Manual

To Next Page

Version 1.0

Replacing Pitch Trim Servo (GSA 81) on Citation CJ

Garmin G1000 Software Version -02

Caution: Before starting the software or configuration loading process, certain

items may be required to be recorded first, to prevent loss of

information or settings. See Section 1 for details.

Caution: Make certain that all SD cards are available before starting. These are

usually located in a blue pouch onboard the aircraft.

Caution: Follow all steps in a given section for specific loadings. Failure to do so

will result in probable rework.

Caution: Ensure that power is available through a GPU so that power is not

interrupted during the loading process.

Note: This document is to supplement, not replace, the Cessna Citation 525

MM, and Garmin G1000 SMM.

Note: Reference latest revision of the Garmin G1000 SMM 190-00934-00.

Table of Contents

Section 1 Software and Configuration Loading

Section 2 Troubleshooting

Need help?

Do you have a question about the Garmin GSA 81 and is the answer not in the manual?

Summary

Details the process for loading software and configuration into the GSA 80 pitch trim servo after its replacement.

Offers corrective actions for issues arising post-software loading, such as database mismatches and configuration errors.

Details the process for loading software and configuration into the GSA 80 pitch trim servo after its replacement.

Offers corrective actions for issues arising post-software loading, such as database mismatches and configuration errors.

General