Garmin NMEA 2000 Network Updater User Manual

NMEA 2000 Network Updater Instructions 3
About the NMEA 2000
Network Updater
Notice:
The NMEA 2000 Network Updater
is not water resistant. Use the device
only to update the network, do not
install it permanently on the boat.
The NMEA 2000 Network
Updater will only update devices
on the network that are not
equipped with a card reader.
The NMEA 2000 Network
Updater will only update
Garmin
®
devices.
Preparing a Memory Card
Tools required (not included):
Secure Digital (SD) memory
card, 512 MB or larger
PC with an SD card reader
and an Internet connection
•
•
•
•
1. Go to www.garmin.com
/support/software/marine
.html.
2. Download the latest Garmin
Marine Network update package.
3. Insert the memory card into the
card reader on your computer.
4. Follow the directions provided
on the Web site to transfer the
update les to the memory card.
5. Remove the memory card from
the card reader.
Connecting the NMEA 2000
Network Updater to Your
NMEA 2000 Network
Use the included NMEA 2000
T-connector to connect the
NMEA 2000 Network Updater
to your NMEA 2000 network
according to the sample diagram
on page 2.

Garmin NMEA 2000 Network Updater Specifications

General

Brand	Garmin
Model	NMEA 2000 Network Updater
Category	Adapter
Language	English