Garmin SPEED SENSOR 2 - Introduction; Installing the Speed Sensor

4 Spd/Cad Sensor 2
EN
Quick Start Manual
WARNING
See the Important Safety and Product
Information guide in the previous pages
for product warnings and other important
information.
Installing the Speed Sensor
NOTE: If you do not have this sensor, you can
skip this task.
TIP: Garmin recommends you secure your
bike on a stand while installing the sensor.
1 Place and hold the speed sensor on top of
the wheel hub.
2 Pull the strap ① around the wheel hub,
and attach it to the hook ② on the sensor.
The sensor may be tilted when installed on
an asymmetrical hub. This does not affect
operation.