Spd/Cad Sensor 2
5
EN
3 Rotate the wheel to check for clearance.
The sensor should not contact other parts
of your bike.
NOTE: The LED ashes green for ve
seconds to indicate activity after two
revolutions.
Installing the Cadence Sensor
NOTE: If you do not have this sensor, you can
skip this task.
TIP: Garmin recommends you secure your
bike on a stand while installing the sensor.
1 Select the band size that ts your crank
arm
①
securely.
The band you select should be the
smallest one that stretches across the
crank arm.
2 On the non-drive side, place and hold the
at side of the cadence sensor on the
inside of the crank arm.
3 Pull the bands
②
around the crank arm,
and attach them to the hooks
③
on the
sensor.
To Next Page
Loading...
Need help?
General
