Garmin tempe - Initial Setup Procedures; Separating the Sensor from the Clip; Installing the Battery

Instructions
See the Important Safety and Product Information
guide in the GPS product box for product
warnings and other important information.
Do not use a sharp object to remove
user -replaceable batteries.
Contact your local waste disposal department
to properly recycle the batteries. Perchlorate
Material - special handling may apply. See
www.dtsc.ca . gov/hazardouswaste/perchlorate.
Separating the Sensor from the
Clip
1 Press the tab<D on the clip.
2 Lift and separate the sensor® from the clip .
Installing the Battery
1 Locate the circular battery cover <Don the
back of the device.
-·-·-·-·-·-· · ·---
--··-··-··-··- · -·· · ·-------··-·-
2