Need help?Do you have a question about the GARO Wallbox GLB Series and is the answer not in the manual?
General| Model | GLB Series |
|---|---|
| Charging Standard | IEC 61851-1 |
| Max Charging Power | 22kW |
| Ingress Protection | IP54 |
| Type | Wallbox |
| Rated Voltage | 230V AC |
| Input Voltage | 230V AC |
| Output Voltage | 230V AC |
| Rated Current | 16A, 32A |
| Output Current | 16A, 32A |
| Connectivity | Wi-Fi, Ethernet |
| Communication | OCPP 1.6 |
| Protection Features | Overcurrent, Overvoltage, Short Circuit, Ground Fault, Over Temperature |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Power Output | 3.7kW, 7.4kW, 11kW, 22kW |
| Operating Temperature | -25°C to +55°C |
Explains warning symbols and lists crucial safety warnings for safe operation.
Provides important precautions and installation guidance for safe use.
Lists package contents and required tools for installation.
Provides a sequential guide for installing the GLB Wallbox.
Details dip switch settings for various functions like current limits and RFID.
Explains how to configure and use the remote control function via dip switches.
Describes DLM setup for single GLB Wallboxes, including approved energy meters.
Details DLM configuration for multiple GLB Wallboxes in a group setup.
Instructions for installing and configuring the RFID reader.
Guidance on connecting the GLB Wallbox to a network via LAN.
Visuals of mainboard connections and physical dimensions.
Steps and information for charging an electric vehicle.
Explains status lights, sounds, and common troubleshooting steps.
Guides for connecting to Wi-Fi, Ethernet DHCP, and static IP.
Overview of features and settings available in the web interface.
Procedures for updating the GLB Wallbox firmware.
Guidelines for cleaning and maintaining the GLB Wallbox.
Details product type, standards, voltage, and protection class.
Information on cable length, installation height, and weight.
To Next Page
