Gartner GAT Smart.Lock 7001 User Manual

GAT Smart.Lock 7001
Centrally Operated Locker Lock
Application
The GAT Smart.Lock 7001 is the ideal solution for the convenient
electronic locking of lockers in various areas of the industry, logistics,
organisation, and training.
The GAT Smart.Lock 7001 is suitable for any type of material (wood, HPL,
solid plastic, glass, and sheet metal) and can be used for left- and right-
hinged doors alike. The narrow design also enables its installation in the side
wall of a closet.
Description PartNo.
GAT Smart.Lock 7001
Self-locking electronic locker lock with integrated
electronic door open status, without bolt set and without
door label, plug connection
369737
1
www.gantner.com
Order information
Description PartNo.
GAT Smart.Lock 7000 Bolt Set
Door and distance sheet and door shackle for GAT
Smart.Lock 7001
434023
GAT Smart.Controller S 7000
Control unit (slave controller) for the electronic locker locks
GAT Smart.Lock 7001
253628
GAT Smart.Lock Cable 2m OE
Connection cable 2 m, suitable for GAT Smart.Lock
7001, 4-pin plug and open end
229631
GAT Smart.Lock Cable 4m OE
Connection cable 4 m, suitable for GAT Smart.Lock
7001, 4-pin plug and open end
457432
GAT NET.Lock Cable 4m
Connection cable 4 m, suitable for GAT Smart.Lock
7001, 4-pin plug on both ends
321826
GAT NET.Lock Connector
Connector for two connection cables GAT NET.Lock
Cable 4m
442123
Accessories
Valid as from November 27
th
2012 • Technical data subject to modifications without noitce!
DB_GAT-SMARTLOCK7001_EN_20.indd • PartNo: 426731
Functional description
In order to lock a locker, the user closes the locker door. The locker is
automatically locked by pushing the door shut.
For opening the locker there are several solutions, e.g. by user identification
on a central terminal.
Highlights
•
Electronic opening of the locker door
•
Automatic locking by manually pushing the door shut
•
Installation in the intermediate wall of the lockers or inside the locker
•
Easy installation
•
50,000 locking/opening cycles
•
Retaining force minimum 2000 N
•
Continuous metal construction (zinc diecasting)
•
Locking components made of stainless steel MIM 316L
•
Electronic feedback, indicating the locking status (break-open alarm)
•
4-pin plug for the electrical connection
•
Mounting safety pin and emergency opening

Gartner GAT Smart.Lock 7001 Specifications

General

Brand	Gartner
Model	GAT Smart.Lock 7001
Category	Locks
Language	English

Summary

Application

Functional Description

Order Information

Accessories

Technical Data

Dimensions GAT Smart.Lock 7001

Visual representation of the lock's physical dimensions and key measurement points.

Dimensions of Door Shackle and Door Sheets

Detailed measurements for the door shackle and associated plates.

Typical Application

Diagram illustrating the typical system setup with controllers and lockers.

Mounting and Installation Instructions

Installation Dimensions for GAT Smart.Lock 7001 and Door Shackle

Key measurement points and tolerances for mounting the lock and shackle.

Mounting Safety Pin

Procedure for using and removing the mounting safety pin for secure installation.

Door Width

Specifies the minimum required door width for proper shackle engagement.

Installation of GAT Smart.Lock 7001 in the Intermediate Locker Wall

Guidance for installing the lock in an intermediate wall for hidden mounting.

Electrical Connections

Connection Cable

Details on using the GAT NET.Lock Cable for connecting to slave controllers.

Locking Feedback

Explains the potential-free contact indicating the lock status (locked/closed).

Power Supply/Control

Information on DC power supply for unlocking the solenoid.

Safety Instructions

Crucial safety guidelines for installation, operation, and handling.