Gas Clip MGC simple User Manual

Contact Information
MGC-S QSG v1.01
Portable gas detectors you can count on
Portable gas detectors you can count on
Quick-Start Guide
Multi Gas Clip
Simple
Gas Clip Technologies, Inc.
610 Uptown Blvd, Suite 4100
Cedar Hill, TX 75104 USA
Phone: +1.972.775.7577
Fax: +1.972.775.2483
Toll Free: 1.877.525.0808
E-mail: info@gascliptech.com
Website: www.gascliptech.com
Battery Information
This detector is designed so that the battery won't need charging
or replacing during the life of the detector.
Detector Life Countdown
Once activated, the detector will display 24 months of life
remaining. Detector will continue to countdown and display
months remaining until 30 days remain. Display will then show
days remaining until end of life.
Additional Questions?
For additional information on the Multi Gas Clip Simple gas
detector regarding programing, bump testing, calibrating, etc.
please refer to the Multi Gas Clip Simple User’s Manual. The
manual and other helpful videos & information are available for
viewing or download at www.gascliptech.com.

Gas Clip MGC simple Specifications

General

Vibration Alarm	Yes
Target Gases	Hydrogen Sulfide (H2S), Carbon Monoxide (CO), Oxygen (O2), Combustibles (%LEL)
Sensor Type	Electrochemical (H2S, CO, O2), Catalytic (LEL)
Display	LCD
Visual Alarm	Yes (LED)
Detection Gases	Hydrogen Sulfide (H2S), Carbon Monoxide (CO), Oxygen (O2), Combustible gases (%LEL)
Certifications	ATEX, IECEx, UL, CSA
Range	H2S: 0-100 ppm, CO: 0-500 ppm, O2: 0-30% vol, LEL: 0-100% LEL

Summary

Safety and Display Information

Pre-Operation Safety Guidelines

Crucial safety instructions to follow before using the Multi Gas Clip Simple detector.

Understanding Display Components

Details the various icons and indicators shown on the detector's screen during operation.

Factory Default Alarm Settings

Lists the pre-configured alarm thresholds for H2S, CO, O2, and LEL sensors.

Detector Operation and Maintenance

Turning On the Detector

Instructions for activating the detector and its stabilization process.

Auto Zeroing Procedure

Steps to perform an auto-zero calibration on the detector.

Bump Testing and Calibration

Guidance on performing bump tests and calibration using docks.

Device Information and Support

Battery and Detector Lifespan

Information on the detector's integrated battery and life countdown feature.

Additional Questions and Contact

Resources for further information and contact details for Gas Clip Technologies.