_________________________________________________________________________________________
Schiltknecht anemometers do not form part of the ATEX certification of the Gas Data GFM
series. Contact Gas Data for further advice on the safe use of these probes
These operating instructions are intended to ensure that the Schiltknecht measuring instrument and probe
remain perfectly serviceable, guaranteeing fault-free and safe operation. We therefore ask you to read these
instructions carefully before placing the Instrument in operation for the first time.
Immediately after unpacking the instrument, please check for any mechanical damage. Any damage detected
should be immediately reported to the relevant post office or to the carrier at your company's location.
Avoid moisture, extreme temperatures and vibrations.
Do not shake!
Cleaning of probes and indication unit only according to cleaning instruction!
Strong electromagnetic interference (e.g. transformers, radio transmitting equipment) may affect the
accuracy of the measuring instrument.
Every Schiltknecht instrument has a designed operating range. The transducers have been developed and
produced for this envisaged operating range. The calibration corresponds to the actual state at the moment
measurements are made.
It is influenced by incorrect handling and in the course of the period of use.
It must be ensured that the instrument is operated only by trained personnel the instrument is regularly
serviced and calibrated no changes are made to the instrument except those described in the operating
instructions.
Streamline Measuring Head
The form of the measuring head guarantees a high direction insensitivity which is approx. +/- 20 degrees for
Micro head and +/- 25 degrees for Mini head.
To Next Page
Loading...
