Need help?Do you have a question about the Gas Sense GS-300.A and is the answer not in the manual?
General| Brand | Gas Sense |
|---|---|
| Model | GS-300.A |
| Category | Gas Detectors |
| Language | English |
Highlights critical safety instructions for installation and operation by qualified professionals.
Explains the meaning of warning symbols used in the manual for safety precautions and grounding.
Provides crucial details regarding detector checks and calibration before operation and at delivery.
Outlines the manufacturer's liability limitations concerning product use, damages, and inability to use.
Details the 24-month warranty period and conditions for product repair or replacement due to defects.
Describes the gas detection system's components and intended use for explosive and toxic gases.
Lists the various sensing technologies (catalytic, electrochemical, infrared, semiconductor) used for gas detection.
Illustrates the external components and layout of the GS-300.A and GS-300.N gas detectors.
Details the internal circuit board, connection terminals, and calibration button of the detectors.
Guidance on detector positioning for optimal gas monitoring and service access.
Instructions for physically attaching the detector to a wall using mounting screws and drilling.
Safety and technical requirements for making electrical connections by qualified personnel.
Details on shielded cable types, cross-section, and length limits for the GS-300.A model.
Instructions for connecting GS-300.N using shielded cable, twisted pairs for communication and power.
Describes detector states: Initial Stabilisation, Working Mode, Alarm 1, 2, 3, and FAULT.
Explains the importance and process of calibrating detectors for accuracy and system integrity.
Step-by-step guide for performing zero and span calibration using tactile buttons or a magnetic cup.
Instructions for cleaning the detector enclosure using a damp cloth, avoiding harsh chemicals.
Recommends periodic inspection of alarm/fault relays, buzzer, and indications using test gas.
Guidance on regular testing and annual calibration, considering environmental factors and exposure.
Lists ordering codes for GS-300.A models detecting combustible, toxic, and refrigerant gases.
Lists ordering codes for GS-300.N models detecting combustible and toxic gases.
Lists ordering codes for GS-300.N models detecting refrigerant gases.
To Next Page