EasyManua.ls Logo

GASLAND chef OTR1603B - Surface Light Replacement; Charcoal Filter Replacement

GASLAND chef OTR1603B
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
15
support@gaslandchef.com
1 (844) 538-7890
Surface light replacement
CAUTION
To avoid risk of personal injury or property damage, wear gloves when replacing
the light bulbs.
1. Unplug the microwave oven or turn off power at the main circuit breaker.
2. Remove the bulb cover mounting screws at both light positions under the
microwave.
3. Replace bulb with 30 watt appliance bulb.
4. Re-install bulb cover and mounting screw.
5. Plug the microwave back into the power supply or turn the power back on at
the main circuit breaker.
Cleaning And Care
Disconnect the power cord before cleaning or leave the door open to deactivate
the oven during cleaning.
Charcoal filter replacement
Charcoal filter installed in your microwave oven, is used for nonvented, recirculat-
ed installation. The filter should be changed every 6 to 12 months depending on
use.
1. Disconnect power to the microwave oven at the circuit breaker panel or by
unplugging.
2. Remove the vent grill mounting screws.
3. Pull the vent grill away from the unit.

Related product manuals