Need help?Do you have a question about the Gaspar Xicoy X45 and is the answer not in the manual?
Copyright and usage rights for the manual.
Limitations of liability and warnings about misuse.
Describes the engine's electronic control unit and its function.
Explains the Hub as the central connection point for ECU and accessories.
Details the fuel pump's design, construction, and connection.
Describes the internal data recorder/playback function of the ECU.
Details various display screen options and their functions.
Guides on connecting the engine, battery, and avoiding reverse polarity.
Guides on configuring the ECU and its interface.
Explains how to align the transmitter to the ECU for proper operation.
Provides step-by-step instructions for aligning the transmitter.
Details the recommended failsafe settings for safety.
Instructions for setting up a test stand for engine preparation.
Crucial safety and operational notes for kerostart engines.
Guides on the engine startup sequence and checks.
Steps for conducting the first engine runs safely.
Detailed steps of the engine starting process.
How to safely shut down the engine after operation.
Actions to take during an emergency or abnormal start.
How to reduce the engine's maximum power output.
Explains the automatic engine restart feature.
Advises on when to enable autorestart and its implications.
Describes available throttle curve settings for thrust control.
How to adjust acceleration and deceleration times.
Guidelines for selecting and fitting exhaust tubes.
Recommendations for using the engine in specific aircraft types.
Lists and explains ECU error and status messages.
Covers how the ECU records and stores operational data for diagnosis.
Explains various diagnosis messages for troubleshooting.
General| Thrust | 45N |
|---|---|
| EGT | 650°C |
| Compressor | Radial |
| Turbine | Axial |
| Fuel | Kerosene |
| Starter | Electric |
To Next Page
