EasyManua.ls Logo

Gaspardo Monica - User Manual

Gaspardo Monica
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
*)
*) Valido per Paesi UE
*) Valid for EU member countries
*) Valable dans les Pays UE
*) Gilt für EU-Mitgliedsländer
*) Válido para Países UE
MONICA
Cod. G19502563 2012-11
USO E MANUTENZIONE
USE AND MAINTENANCE
GEBRAUCH UND WARTUNG
EMPLOI ET ENTRETIEN
EMPLEO Y MANTENIMIENTO
IT
EN
DE
FR
ES
MASCHIO GASPARDO S.p.A.
Question and Answer IconNeed help?

Do you have a question about the Gaspardo Monica and is the answer not in the manual?

Summary

Introduction

Guarantee

Details warranty validity, claims, and conditions for service.

Expiry of Guarantee

Lists conditions under which the guarantee becomes void.

Description of the Seeder

Explains the machine's purpose, operation, and variations.

Technical Data

Identification

Explains details found on the machine's identification plate.

Handling

Assembly Drawing

Warning Signs

Warning Signals

Instructions to read the manual before operation and maintenance.

Danger Signals

Details specific hazards like inhalation, crushing, and entanglement.

Indicator Signals

Symbols indicating safety clothing and lifting points.

Safety Regulations and Accident Prevention

General Norms

Basic safety rules for operating the machine and ensuring user safety.

Tractor Hitch

Procedures and precautions for attaching the equipment to the tractor.

Transport on Road

Rules and safety advice for road travel with the machine.

Cardan Shaft

Guidelines for safe installation, use, and maintenance of the cardan shaft.

Maintenance in Safety

Safety Measures Concerning the Hydraulics

Precautions for connecting and using hydraulic systems safely.

Instructions for Use

Attachment the Tractor

Step-by-step instructions for connecting the seeder to the tractor.

Unhooking the Seed Drill from the Tractor

Safe steps for detaching the seeder from the tractor.

Adapting the Cardan Shaft

Stability of Planting Unit and Tractor During Transport

Telescopic Frame

Description of Functioning

Explains how the telescopic frame opens and closes.

Use Instruction

Steps for operating the telescopic toolbar correctly.

Determination of the Row Distance

Determination of the Row Distance

Specific steps for adjusting row spacing using pins.

Transformation from 7 to 6 rows (70-75 cm)

Seed Selection

Seed Distributor

Details about the seed distributor and its components.

Replacement of Seed Disc and Adjustments

Procedures for replacing seed discs and making adjustments.

Replacing the Cover Seal

Instructions for checking and replacing the distributor cover seal.

Expeller Seeds

Guidance on using different seed expellers based on seed size.

Selector Adjustment

How to adjust the selector for different seed types.

Anti-Overflow Plate Adjustment

Adjusting the plate to prevent seed spillage.

Vacuum Pump

Distribution Adjustment

Kind of Seed to be Distributed:

Identifying seed type to select the correct seed disk holes.

Longitudinal Distance Between One Seed and Another:

Factors affecting seed spacing and how to calculate it.

1) From the Seed Investment Table:

Using tables to determine longitudinal seed spacing.

2) About the Seed Planter:

Verifying gearbox pinion settings for seed planting.

3) From the Table of Longitudinal Seed Planting Distances (Table 5):

Selecting gearbox ratios based on seed planting distance.

4) About the Seed Planter:

Adjusting gearbox settings and checking chain tension.

Checking the Gearbox Transmission

Deposition of the Seed

Planting Unit

Adjusting the planting unit, including side wheels and depth.

Rear Covering Wheels

Adjusting rear wheels for proper seed coverage and furrow closing.

Front Clod Clearer

Adjusting the front clod clearer for optimal seedbed preparation.

Planting Unit Exclusion

Planting Unit Transmission

Row Marker

System Regulation

Adjusting the hydraulic system and flow regulators for the row marker.

Calibration of the Flow Regulators:

Procedure for calibrating the hydraulic flow regulators.

Row Marker Disk Adjustment

Row Marker with Trace on the Tractor Wheel (L1)

Adjusting disc distance for tracing lines with the tractor wheel.

Row Marker with Trace in the Centre of the Tractor (L2)

Adjusting disc distance for tracing lines with the tractor center.

Distribution of Chemical Products

Hopper and Tank Filling

Procedures and safety for filling hoppers with chemicals.

Regulating the Fertilizer Interring Hoe

Adjusting the fertilizer interring hoe for optimal application.

Table of Distribution Quantity (kg;Ha)

To Change the Pair of Pinions, Work as Follows:

Steps to change drive pinions for distribution adjustment.

Speedy Set - Table of Distribution Quantity in kg;ha

Microgranulator - Table of Distribution Quantity in kg; ha

Operations for Putting the Machine into Service

When the Machine is New

Initial assembly and checks for a new machine.

Checks and Preventative Maintenance

Routine checks and maintenance before operation.

Attachment the Tractor

Connecting the seeder to the tractor safely and correctly.

Preparing for Seeding

Procedures for setting up the machine for actual seeding.

Distribution of Chemical Products

Filling and setting up chemical product distribution.

During Seeding

The End of Operation

Daily Rest Period

Maintenance

Using Oils and Greases

Guidelines for proper use of lubricants.

Recommended Lubricants

Specific types of oils and greases recommended for the machine.

Cleaning

How to clean the machine and dispose of cleaning waste.

Using Pressurised Cleaning Systems (Air;Water)

Precautions when using air or water for cleaning.

Hydraulic Systems

Maintenance requirements for the machine's hydraulic systems.

When the Machine is New

Initial lubrication and bolt checks after first use.

At the Beginning of the Seeding Season

Checks and lubrication before starting the seeding season.

Every Eight Hours of Operation

Lubrication tasks to be performed every 8 operating hours.

Every Fifty Hours of Operation

Checks and maintenance needed every 50 operating hours.

Every Six Months

Lubrication tasks for height adjuster and bearings.

Periodically

Periodic checks of tyre pressure.

Every Five Years

Replacement of hydraulic system tubes every five years.

Every 400 Working Hours

Gearbox oil change after 400 working hours.

Rest Periods

Procedures for storing the machine during long periods of rest.

Problems, Causes and Solutions

Irregular Seed Drilling (Inaccurate Distance Between Seeds).

Causes and solutions for uneven seed spacing.

Seeds Spill Over from the Distributor.

Reasons for seeds spilling and how to fix it.

Few Seeds Reach the Distributor.

Troubleshooting steps when insufficient seeds are distributed.

Seed Disc Does Not Rotate or Does Not Work Correctly.

Solutions for a non-functioning seed disc.

The Seeds Fall Off the Seed Disc.

Addressing issues with seeds detaching from the disc.

Seeds on Surface.

Causes and solutions for seeds appearing on the soil surface.

Seeds Too Deep.

Correcting excessive seeding depth.

Irregular Seed Drilling Depth.

Adjusting the clod clearer for proper seed drilling depth.

The Seed Furrow Remains Open and the Seeds Uncovered.

Fixing open furrows and uncovered seeds.

The Gearbox Chain Jumps Off the Gears.

Solutions for gearbox chain issues.

Irregular Distribution of Chemical Products (Fertilizers and Microgranulates)

Troubleshooting irregular distribution of fertilizers or microgranules.

Row Marker Does Not Work or Works Irregularly.

Diagnosing and fixing row marker malfunctions.

Demolition and Disposal

English EC Declaration of Conformity

Gaspardo Monica Specifications

General IconGeneral
BrandGaspardo
ModelMonica
CategoryFarm Equipment
LanguageEnglish

Related product manuals