STANDARD REGENAIR BLOWER
O
PERATION
& M
AINTENANCE
M
ANUAL
Thank you for purchasing this Gast product. It is manufactured to the highest standards
using quality materials. Please follow all recommended maintenance, operational
and safety instructions and you will receive years of trouble free service.
General information
This manual does not apply to:
• SDR Series blowers without motors
• Blowers powered with Explosion Proof Motors
PART NO. 70 - 6000 F2-200 (REV-J)
Model R1 Shown
Model R6P350A S h o w n
Model R7P S h o w n
Product Use Criteria:
• Pump only clean, dry air.
• Operate at -20ºF - 104ºF (-29ºC - 40ºC).
• Protect unit from dirt & moisture.
• Do not pump flammable or explosive gases or
use in an atmosphere that contains such gases.
• Protect all surrounding items from exhaust air. This
exhaust air can become very hot.
• Corrosive gases and particulate material will
damage unit. Water vapor, oil-based contaminants
or other liquids must be filtered out.
• The blower must be installed with the properly sized inlet and inline filters, gauges and
relief valves to protect the product from dirt and over-heating.
• Consult your Gast Distributor/Representative
before using at high altitudes.
1
70-6000 REV J.qxd 7/23/07 2:54 PM Page 1
To Next Page
Need help?
General