EasyManua.ls Logo

Gastrorag DK100 - Cleaning and Maintenance; Tank Cleaning; Decalcifying

Gastrorag DK100
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
10
Otherwise, spontaneous operation of the thermal relay and
equipment shutdown during operation are possible.
heating element clean.
Rinse the tank thoroughly with clean water. Always keep the
water) and let it work for 15-30 minutes. Drain the solution.
Dissolve the cleaning agent in water (1 pack per 5 quarts of
Fill the tank with hot water.
Cleaning is done in the following way:
deposits from the inside of the tank and from the heating element.
2. You can use a special cleaning agent to remove dark coffee
water.
tank and the heating element with a soft sponge or brush. Drain the
1. Pour some clean, hot water into the tank. Clean the inside of the
TANK CLEANING
and thoroughly rinsed with clean water at the end of work.
water pipe and lid should be washed daily with warm soapy water
regularly with a clean, damp cloth or sponge. The coffee basket,
solvents to clean equipment. Wipe the main part of the appliance
objects, aggressive cleaning agents, gasoline, acids, alkalis and
It is not allowed to use abrasive materials, piercing and cutting
down to room temperature before cleaning it.
Always make sure that the appliance is unplugged and cooled
Cleaning and maintenance
Cleaning and maintenance
instructions on the packaging.
1. P
repare the decalcifying solution in accordance with the
tools. Decalcifying is as follows:
machine. It is recommended to decalcify regularly using
special
In areas with hard water, scale may build up inside
the coffee
DECALCIFYING

Related product manuals