Gate Bure Standard - General Advice and Specifications; General Maintenance Advice; Technical Specifications

BURE STANDARD/S/LOW/LOW S
GATERD.SE6
7. General maintenance advice
• Clean the walker and its armrests clean as necessary. Wipe using a soap solution/surface disinfectant.
• The product can be washed in a pressure washer/machine at 60˚C for ten minutes. To increase lifetime,
avoid aiming high pressure water jets at bearings.
• Replace damaged parts immediately; must be done by experienced personnel.
• The product is only intended for indoor use.
8. Technical specications
Dimensions apply to walkers with 125 mm castors.
Part No. Product Product
width
Max user
weight
Length Height Armrest/
Internal
dimension
56-311 Standard GAS 78cm 150kg 80cm 90-129cmc 25-50cm
56-301 S GAS 66cm 150kg 79cm 90-129cm 30-45cm
56-322 Low GAS 78cm 150kg 80cm 75-95cm 25-50cm
56-322-S Low S GAS 66cm 150kg 79cm 75-95cm 30-45cm