130
Chapter 7: Sending and Receiving Faxes
www.gateway.com
To configure Microsoft Fax:
1 Click Start, All Programs, Accessories, Communications, Fax, then click Fax
Console
. The Fax Configuration Wizard opens.
2 On the Welcome to Fax Configuration Wizard screen, click Next. The Sender
Information screen opens.
3 Type the information about yourself that you want to appear on your fax
cover page, then click
Next. The Select Device for Sending or Receiving Faxes
screen opens.
4 Click the arrow to open the Please select the fax device list, then click the
modem you are using to send and receive faxes.
5 If you want the modem to automatically answer the telephone in order
to receive faxes, click the
Enable Receive check box.
6 Click Next. The Transmitting Subscriber Identification (TSID) screen opens.
7 Type the transmitting fax identifier information. This identifier
information is required by law. You can type up to 20 characters in the
text box. We suggest using eight characters for your identifier name,
followed by 12 characters for your telephone number.
To Next Page
Loading...
