3
www.gateway.com
5 If your computer supports analog video, connect the analog video cable to the analog
connector under the bottom of the screen.
- OR -
If your computer supports digital video, connect the digital video cable to the DVI
connector under the bottom of the screen (FPD 1830 and FPD 1930 only).
6 Return the monitor to its upright position.
Important The FPD 1530 and FPD 1730 monitors have one connection. These
monitors do not support digital video.
Make sure that you only connect one video cable to the FPD 1830
and FPD 1930 monitor and computer. The only way to use both
connections it to share the monitor between two computers. Use the
SOURCE button to change between computers. For more
information, see “Adjusting monitor settings” on page 7.
To Next Page
Loading...
Need help?
General
