Gateway NV-52 - Using the Status Indicators

CHAPTER 3: Setting Up and Getting Started
26
To restart your notebook:
• Click (Start), click the arrow next to the lock
icon, then click Restart. The notebook turns off,
then turns on again.
Using the status indicators
Status indicators inform you when a drive is being used
or when a button has been pressed that affects how
the keyboard is used. The status indicators are located
below the screen.
Important
If your notebook does not turn off immediately,
complete the following steps until the notebook turns off:
1. Press and hold the power button for about five seconds,
then release it.
2. Unplug the power cord and remove the battery for more
than 10 seconds.
Important
If none of the indicators are on, you may need to press FN+F1
to toggle the status indicators on.
Indicator Icon Description
Bluetooth
❥
LED on - Bluetooth
communication is turned on.
❥
LED off - Bluetooth
communication is turned off.
Hard drive
❥
LED blinking - The drive is
being accessed.
❥
LED off - The drive is not being
accessed.
Num lock
❥
LED on - Num lock is turned
on.
❥
LED off - Num lock is turned
off.
Bluetooth
HDD
Caps lock
Num lock
Battery
Power