To Next Page
P
perezandrewJul 30, 2025
What to do if my Gator Prime Water Pump stops or fails to deliver rated flow or pressure?
- YyolandabarkerJul 30, 2025
If your Gator Prime Water Pump stops or doesn't deliver the expected flow or pressure, you can try the following: Correct any leaks, replace the suction hose, check the pump vacuum, and replace any leaking or worn seals or gaskets. Also, check and clean the strainer if needed, ensure proper installation and submergence, replace any worn or damaged parts, verify the impeller is centered and rotates correctly, and remove any debris from the impeller. Check the driver output and belts or couplings for slippage, install a bypass line, measure lift with a vacuum gauge, and reduce lift or friction losses in the suction line.
General