Need help?Do you have a question about the GATT AUDIO GAN-15 and is the answer not in the manual?
General| Brand | GATT AUDIO |
|---|---|
| Model | GAN-15 |
| Category | Speakers |
| Language | English |
Adjusts the low frequencies of the system.
Adjusts the volume of the source connected to the input connector.
Lights when preamp input is too loud, indicating volume reduction is needed.
Lights when signal is applied to the preamp.
XLR+1/4" input for microphone and line level inputs.
Selects local mains voltage (110V or 220V).
Turns the system on and off.
Built-in module for MP3 playback, refer to next page for operations.
Adjusts the high frequencies of the system.
Adjusts the volume of the MP3 music player module.
Outputs line level signal from the preamp.
Determines signal type fed to connector 11 (stereo or mono).
Sets input signal type for connector 5 (line or mic).
Connects to mains outlet via compatible power cable.
Protects against malfunction; replaceable with same type/rating.
Adjusts the volume of the source connected to the input connector.
Lights when preamp input is too loud, indicating volume reduction is needed.
Lights when microphone signal is selected and applied.
Lights when line signal is selected and applied.
Sets input signal type for connector 11 (line or mic).
Selects local mains voltage (110V or 220V).
Turns the system on and off.
Adjusts the low frequencies of the system.
Adjusts the high frequencies of the system.
Outputs line level signal from the preamp.
XLR+1/4" input for microphone and line level inputs.
Connects to mains outlet via compatible power cable.
Protects against malfunction; replaceable with same type/rating.
Adjusts the volume of the source connected to the input connector 3.
Lights when the power is turned on.
XLR connector for connecting your audio source.
Selects local mains voltage (110V or 220V).
Turns the system on and off.
Inverts output phase by 180 degrees for phase problem solving.
Sets frequency bandwidth of the signal (40-80Hz to 40-250Hz).
Lights when limiter is activated due to loud signal.
Outputs full range line level signal from the preamp.
Protects against malfunction; replaceable with same type/rating.
Connects to mains outlet via compatible power cable.
Connects your speaker signal here (pin1+ hot, pin 1- ground).
Allows patching signal to another passive speaker.
Connects USB 1.1 flash drives; MP3 files must be in root directory.
Displays the currently played track number.
Selects the previous track.
Selects the next track.
Starts or pauses playback; also switches stereo/mono modes.
Specifications for GAN-15, GAN-15A, GAN-15A-MP, GAN-15A-SW models.
List of available accessories like stands and mounts.
To Next Page