G A UI
T AI SHIH HOBB Y CORPOR A TION
G A UI
T AI SHIH HOBB Y CORPOR A TION
P.7
No.1
No.2
No.3
No.4
O3 x 8
O3 x 8
將訊號線由上方穿出，電源線由下方穿出，並將內外套管鎖上螺絲固定。
機身製作
機身製作
相同方法逐一將四個動力艙組合。
機頭方向
Main Frame Assembly
Signal cable should come out from top frame, power cable should come out from bottom
frame. Tighten flight arms with O3 x 8 screws.
Use same method and complete the other three flight arms.
Main Frame Assembly
Nose Direction
To Next Page
Loading...