GAUI Hurricane EP200 V2 Series User Manual

Equipment Recommendations :
1. Transmitter : 6 Channel or more ( CCPM-Capable )
2. Receiver : Micro Receiver 6 Channel or more ( NO : 921601 ~ 3 )
3. Servos : BMS 306BB 6g Servos ( NO : 922601 ) or 9g Servos as the
same size for EP400 class heli
4. Motor : 7.4V ~ 11.1V BL-Motor KV-4800 ( NO : 203501 )
5. Battery : Li-Po 7.4V ~ 11.1V 800mah ( NO : 926080、926081 )
6. ESC : 18A Micro ESC ( NO : 923182 )
7. Gyro : GU210 Heading Hold Gyro ( NO : 924210 ) for Hurricane200V2 SE
or GU365 FES 3-Axis Gyro ( NO : 924365 ) for Hurricane200V2 FES
8. Main Blades : SP Blades or Wooden Blades ( NO : 203308、203306 )
9. Flying Weight : 300g 10 % ( Depending on Equipment Used )
Hurricane EP200 V2 Series Instruction Manual
GAUIHobby
105
148.5

GAUI Hurricane EP200 V2 Series Specifications

General

Brand	GAUI
Model	Hurricane EP200 V2 Series
Category	Toy
Language	English

Summary

Equipment Recommendations

Transmitter

Specifies transmitter requirements, including channel count and CCPM capability.

Receiver

Lists recommended micro receiver specifications and part numbers for compatibility.

Servos

Details servo requirements, including specific models and weight classes.

Motor

Specifies compatible motor voltage, type, and KV rating for optimal performance.

Battery

Recommends battery specifications including Li-Po type, voltage, and capacity.

ESC

Lists the required Electronic Speed Controller (ESC) with its amperage rating.

Gyro

Recommends specific gyro models for different helicopter versions.

Main Blades

Suggests types of main blades, such as SP or wooden blades.

Flying Weight

Indicates the target flying weight for optimal performance and handling.

Electronics Installation and Wiring

Tail servo and the heading hold gyro setup

Servo and Linkage Installation

Pitch Setting

Head speed and pitch settings

Main Rotor Head Assembling - 1

Main Rotor Head Assembling - 2

Main Frame Assembling - 1

Main Frame Assembling - 2

Double Joints Tail Slider & CNC Tail Gear Case Assembling

Belt Driven Unit Assembling-1

Belt Driven Unit Assembling-2

Shaft Driven Unit Assembling-1

Shaft Driven Unit Assembling-2

ESC instruction

Battery Management

Explains the ESC's battery protection and management system for longevity.

Flying Mode

Details the different aircraft flying modes selectable on the ESC.

Set Up Procedure

Step-by-step guide for calibrating the ESC and setting operational parameters.

Caution!!

Important safety warnings regarding high power motor system usage and potential hazards.

Specifications of Motor and ESC

Specifications of 18A ESC

Lists the technical specifications for the 18A Electronic Speed Controller.

Specifications of BL Motor

Details the technical specifications of the Brushless DC motor.

GU-365 FES Gyro installing

FES 2Blade Head & Swashplate Assembling

Optional & Replacement Parts

Specification of Screws (1:1)