Gauzy LC6 FLEX Controller - Configure the Flex controller according to the description below:

19
DMX
Configure the Flex controller according to the description below:
Examples
Syntax
Description
Command
Name
Command
A001 A009
A<decimal, 3
digits>
Sets the DMX base
address designated
to the controller.
ASet DMX ID
001 009B
Returns the DMX
base address of the
controller.
BGet DMX ID
HW VERC
Returns the HW
version of the
controller.
C Get HW Ver
FF
Returns information
on the status of the
controller
FGet Status
G0 , G1
G<0 or 1>
0-DMX mode
1-COM mode
Sets operation
mode of the
controller
GSet Mode
COM:
H0, H1
DIMMER:
H0, H1, H2, H4
OPEN
INTERFACE:
H000, H073,
H100
ON OFF mode:
H<0 or 1>
0-OFF
1-ON
DIMMER mode:
H<0 or 1 or 2 or 4>
0-Stop action
1-Transparent
2-Opaque
4-Mute
OPEN INTERFACE:
H<000 to 100>(%)
FHSet Output
PPrints the menuPPrint Menu
X
Runs the controller
in DMX mode
XRun DMX