GBA HR1 User Manual

Astrosystems - GBA HR1
Details the suggested periodical maintenance for GBA HR1 Bill Acceptor
HR1 – Reinigungsanleitung.doc, 9. Juli 2008 Seite 1 von 6
ATTENTION:
No calibrationpaper added in future.
Calibration will be done after programming a new dataset, cleaning and a
defined warming up time only by TAB Austria.
ACHTUNG:
Es wird ab sofort kein Kalibrierungspapier mehr beigelegt.
Die Kalibrierung erfolgt nach Programmierung eines neuen Datensatzes,
Reinigung und einer definierten Wärmzeit ausschließlich durch TAB
Austria.

GBA HR1 Specifications

General

Brand	GBA
Model	HR1
Category	Bank Note Validator
Language	English

Summary

Important Calibration Information

Calibration Policy Update

Notes that calibration paper is no longer included; calibration is performed by TAB Austria only after programming and cleaning.

Periodical Cleaning Procedure

Cleaning Process Steps

Details the steps to disconnect, remove from mounting frame, and open the currency validator for cleaning.

Cleaning with Compressed Air

Use provided compressed air to blow away debris from the note path and OASG lens apertures.

Cleaning with Lint-Free Cloth

Clean note paths, belts, and pinch wheels using a damp lint-free cloth with a weak washing liquid solution.

Rotating Belts

Instructions on how to rotate the belts by turning the gear at the rear of the validator.