4
Please read and keep these important safety instructions
m
Instruction Manual
Inspire+ A4 Inspire+ A3
Laminator Type Personal / Home Laminator
Colour White Black White Black
EU plug (SKU code) 4410031 4402075EU 4410032 4402076EU
UK plug (SKU code) 2104511 4402075 2104512 4402076
Paper Format A4 A3
Entry-width 230mm 330mm
Pouch size range ID card to A4 ID card to A3
Pouch Thickness (min) 75 micron*
Pouch Thickness (max) 125 micron*
Max. throughput thickness
(i.e. pouch & paper)
0.5mm
No. of rollers 2 rollers
Lamination speed
Time to laminate A4 pouch approx. 72 seconds
Pouches per 10 minutes approx. 8 pouches
Warm-Up time (approx.) 4 minutes
Laminator settings Cold / OFF / Hot
No
Over-heating sensor (safety) Yes
Release Lever Manual ABS Release Lever
LED Indicator Red (Power), Green (Ready)
Cold lamination Yes
Voltage / Frequency / Amps 220-240V / 50-60Hz / 1.83A 220-240V / 50-60Hz / 2.4A
Wattage 420 Watts 550 Watts
Product Dimensions
(w x d x h) – mm
350 x 130 x 60 445 x 140 x 60
Product Weight – kg 1.3 kg 1.68 kg
Packaged Dimensions
(w x d x h) – mm
400 x 155 x 70 495 x 165 x 70
Packaged Weight – kg 1.47 kg 1.87 kg
Warranty 1-year 1-year
N.B. All weights and dimensions are approximate
* Pouches are typically described as one micron size. Made of two layers, each layer is the same thickness, so the total thickness is twice the micron size described. For
example, a 125 micron pouch is 250 micron thick in total (2 x 125 micron). However, they should be laminated on the 125 micron setting of any machine and not a 250
micron setting.
• Only use the unit for its intended purpose.
• Do not touch the heating plate of this unit as it may be hot.
• The unit must only be connected to a supply voltage corresponding
to the electrical rating shown on the unit.
• Unit should be connected to a socket outlet near the equipment that
is easily accessible.
• Do not connect to multi adaptors or use with an extension cable.
• Failure to follow these instructions could result in damage/injury and
will invalidate your guarantee.
• Do not attempt to service or repair the unit yourself.
• In the event of a fault, unplug the unit and contact an authorised
Rexel/GBC service representative for any required repairs.
• Do not use this unit if the cable or plug have been damaged.
EN