Page 8 - 7
MaintenanceTitan 110/ 165 Operation and Maintenance Manual
© GBC Films Group November 2000
Rollers only turn in reverse while
depressing .
INFORMATION
REVERSE
e) Repeat steps “c” and “d” until the rollers are
clean.
f) Replace the feed table, pressure plate and front
safety shield.
g) Press POWER to “0”.
8.3 Clean the cabinets and
covers
ELECTRICAL
SHOCK
Remove power from the laminator before
cleaning. You can be severely shocked,
killed or cause a fire.
a) Use a damp cotton terry cloth ( water only ),
clean the exterior of the laminator.
b) If water is not strong enough, you may use a
mild dishwashing detergent with water and a
cotton terry cloth.
ELECTRICAL
SHOCK
Do not use liquid or aerosol cleaners on the
laminator. Do not spill liquid of any kind on
the laminator. You can be severely shocked,
killed or cause a fire. Use only a damp cloth
for cleaning unless other wise specified.
To Next Page
Loading...
General