Need help?Do you have a question about the GCC Technologies PII-132S and is the answer not in the manual?
General| Model | PII-132S |
|---|---|
| Category | Cutter |
| Max Material Thickness | 25 mm |
| Cooling System | Water Cooling |
| Operating Humidity | 30% - 70% |
| Technology | Laser |
| Interface | USB |
| Laser Type | CO2 Laser |
| Positioning Accuracy | 0.1mm |
| Repeatability | 0.1mm |
| Power Supply | AC 220V, 50/60Hz |
Essential safety guidelines for operating the cutting plotter to prevent injury and damage.
Identifies and explains the parts visible from the front of the plotter.
Details the components and features on the rear of the plotter.
Describes the left and right side views of the plotter.
Explains the function of each key and LED on the control panel.
Instructions for initial placement and preparation of the plotter.
Guide for assembling the stand and media support system.
Procedures for connecting power and data cables to the plotter.
Step-by-step guide on how to install and adjust the cutting blade.
Instructions for loading both sheet and roll media onto the plotter.
Tips for ensuring optimal media tracking during long plots.
Explains the function and configuration of dip switches for various settings.
Procedures and indicators for turning the plotter on.
Functionality of the ON/OFF LINE key for connectivity.
How to temporarily halt and resume cutting operations.
Using the repeat function for cutting the last job.
Clearing data from the plotter's buffer memory.
How to set the starting point for cutting operations.
Performing tests to determine optimal cutting force and offset.
Procedures for finishing a cutting job and removing material.
Connecting the plotter using a USB interface.
Connecting the plotter via a parallel port.
Connecting the plotter using a serial (RS-232C) port.
Steps to install the Virtual LCD software.
Prerequisites for using the VLCD utility.
Overview of the VLCD utility's features like Poll Size and Scaling.
Instructions for cleaning the main body and components of the plotter.
Method for cleaning the grid drum to ensure smooth media movement.
Steps for cleaning the pinch rollers for proper media grip.
Steps to diagnose and resolve issues when the plotter won't run.
Understanding LED indicators for operational status, warming, and error messages.
Guidance on resolving issues related to poor cutting quality.
To Next Page
