Need help?Do you have a question about the GCC Technologies Jaguar J5-132LX and is the answer not in the manual?
Provides crucial precautions and notices before starting the installation process.
Instructions for assembling the stand and flexible media support system.
Step-by-step guide for installing the cutting blade into the blade holder.
Procedure for automatically detecting and adjusting the blade length.
Instructions for connecting the cutting plotter to a computer via USB, Serial, or Ethernet.
Guide for installing the necessary drivers for USB connection.
Instructions for installing bundled software like GreatCut and Sure Cuts A Lot.
Step-by-step guide to install and activate the GreatCut software.
Step-by-step guide for loading sheet and roll media onto the plotter.
Instructions for properly loading sheet media onto the plotter.
Instructions for properly loading roll media onto the plotter.
Guide to performing cut tests and adjusting force and offset for best results.
Details on configuring print driver settings for optimal output.
Explains the various options available in the print driver's Option page.
Provides reference settings for various materials to ensure optimal cutting.
Details on the AAS system and its calibration procedures.
Guidelines for creating and using registration marks for AAS auto-detection.
Procedure for testing and adjusting AAS offset for accurate contour cutting.
Steps for performing accurate contour cutting using the AAS function.
Instructions and precautions for cleaning the cutting plotter machine.
Troubleshooting steps for issues where the cutting plotter is not functioning.
Addresses common operational problems and error messages displayed by the plotter.
Troubleshooting steps for issues affecting the quality of cutting results.
Steps for cutting a design using the software and plotter.
General| Brand | GCC Technologies |
|---|---|
| Model | Jaguar J5-132LX |
| Category | Cutter |
| Language | English |
To Next Page
