Need help?Do you have a question about the GDC STANDALONE INTEGRATED MEDIA BLOCK SR-1000 and is the answer not in the manual?
General| Category | Server |
|---|---|
| Model | SR-1000 |
| Type | Standalone Integrated Media Block |
| Power Supply | 100-240V AC, 50/60Hz |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
| Supported Formats | JPEG2000, MPEG-2, H.264 |
| 3D Support | Yes |
| Subtitle Support | Yes |
| Compatibility | DCP-compliant projectors |
| Interface | Ethernet, USB |
Details safety precautions, electrical safety, and testing certifications for the SR-1000.
Displays playback progress and allows operator control of playback.
Interface for creating and editing playlists.
Displays and allows manipulation of clips within a playlist.
Options to manage playlists: Save, Reset, Copy, Rename, Delete, and manage clips.
Buttons to save, reset, or load playlists for playback.
Opens a pop-up to edit properties of individual clips in a playlist.
Step-by-step guide to creating a new playlist.
Describes adding, ordering, and removing clips in the playlist editor.
Configures specific properties for clips within a playlist.
Process for saving the created playlist.
Saves the current playlist, preventing loss of changes.
Loads the saved playlist into the playback interface.
Tab for scheduling playback of content.
Options to add new schedules, view details, delete, and enable/disable the scheduler.
Adds new schedules, specifying show and start date/time.
Manually triggers automation cues and commands for devices.
Executes configured automation labels manually.
Sends automation commands to a configured projector.
Schedules automation cues to execute at specific dates and times.
Adds new schedules, specifying date, time, and executable label.
Tab showing configured automation cues and allowing new cue creation.
Displays configured cues, allowing rearrangement and detail viewing.
Adds actions to cues or creates new automation cues.
Step-by-step guide for adding a new automation cue.
Details of a selected cue including device, action, and parameters.
Selects projector actions (Primitive or Macro) and their parameters.
Configures input automation triggers on the SR-1000.
Adds input triggers, specifying device, trigger type, and cue label.
Configures the SR-1000 for communication with external automation devices.
Creates a new device, specifying its name and type.
Step-by-step guide for creating a new automation device.
Specific configuration settings for projector devices.
Configures automation cues triggered on boot-up and playback errors.
Shows the content available on the SR-1000.
Verifies content correctness using multiple options.
Provides options for immediate or scheduled content deletion.
Verifies the integrity of packages or CPLs.
Deletes packages or CPLs from the system.
Immediately deletes selected PKL/CPL after confirmation.
Schedules deletion of selected PKL/CPL for a future date/time.
Schedules content deletion with name, action, and frequency.
Sets frequency and date & time for deletion scheduling.
Displays and manages all KDMs present on the SR-1000.
Configures content ingest sources on the SR-1000.
Adds new ingest sources and mounts them to select content.
Step-by-step guide for ingesting content from a USB disk.
Selects the USB DRIVE from the Source list to open it.
Selects packages or CPLs using checkboxes for ingestion.
Queues downloading of PKL/CPL for ingestion.
Allows playback from ingest source without ingesting.
Ingests Key Delivery Messages (KDMs) required for encrypted content.
Selects KDMs using checkboxes for ingestion.
Queues downloading of the KDM for ingestion.
Shows scheduled content ingest and verification tasks.
Shows the status of content ingest and verification tasks.
Configures general options for the SR-1000.
Configures general SNMP settings like manager IP and trap intervals.
Configures system information for SNMP queries.
Configures system settings for SNMP traps.
Configures video, audio, subtitle, and other playback settings.
Remaps audio output to appear on different audio channels.
Configures the storage settings on the SR-1000.
Creates a new RAID array by selecting a drive and initiating creation.
Configures system settings on the SR-1000.
Initiates software upgrade by uploading a file and entering password.
Installs software upgrades and displays warranty information.
Initiates software upgrade process by uploading a file.
Detailed steps for performing a software upgrade.
Uploads the selected upgrade file to the SR-1000.
Enters the password for the upgrade package to proceed.
Describes dual projector synchronization for enhanced playback.
Configuration settings for IMB Sync.
To Next Page
