Need help?Do you have a question about the GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK and is the answer not in the manual?
General| Brand | GDC |
|---|---|
| Model | SR-1000 STANDALONE INTEGRATED MEDIA BLOCK |
| Category | Projector Accessories |
| Language | English |
Lists all components included in the SR-1000 packaging for installation.
Instructions for removing interface boards or placeholders from the projector.
Step-by-step guide for physically inserting the SR-1000 into the projector.
How to connect the SR-1000 to the cinema network using a LAN cable.
Steps to connect and configure portable storage devices to the SR-1000.
Steps to connect and configure enterprise storage devices to the SR-1000.
Detailed steps for configuring the IMB's network settings, including IP address.
Procedures for IMB marriage and clearing service door tamper errors.
Configuration steps for integrating the SR-1000 with Barco Series 2 projectors.
Configuration steps for integrating the SR-1000 with NEC Series 2 projectors.
Configuration steps for integrating the SR-1000 with Christie Series 2 projectors.
How to configure 3D input and output settings for Series 2 projectors.
Steps for setting up content ingestion from an external USB hard drive.
Steps for setting up content ingestion from an FTP server.
Configuration steps for setting up server GPIO automation devices.
How to configure projector devices for automation.
Configuration steps for setting up eCNA devices for automation.
Configuration steps for setting up JNIOR devices for automation.
Configuration steps for setting up Christie ACT devices for automation.
Configuration steps for setting up Dolby CP650 devices for automation.
Configuration steps for setting up USL DAX devices for automation.
Configuration steps for setting up USL JSD devices for automation.
To Next Page
