Action to be taken if the apparatus alarm sounds:-
a
Extinguish all naked flames, including all smoking materials.
b Turn off all gas appliances
c Do not switch on or off any electrical lights or appliances
d Turn off the gas supply at the gas emergency control and/or (with L.P.G supply) the storage tank
e Open doors and windows to increase ventilation.
If the alarm continues to operate, even after an alarm re-setting action where appropriate, and the cause of the leak is not
apparent and/or cannot be corrected, vacate the premises and immediately notify the gas supplier and/or the gas emergency
2
4 hour service in order that the installation may be tested and made safe and any necessary repair carried out.
GDS T
echnologies Ltd
Fusion Point,
Ash Lane, Garforth, Leeds
UK
LS25
2GA
T
el +44 (0)113 286 0166 Fax +44 (0)113 287 8178 Email sales@gds-technologies.co.uk www.gds-technologies.co.uk
ref C486
GDS 202 GAS ALARM
CONTROL UNIT PANEL MOUNT OPTION
Panel Cut - Out Area
Drill & Cutting Template
175 mm
113 mm
88 mm
108 mm
B
A
For front panel mounting
drill holes
A
x4 - 3mm, mount using No.6 20mm self tapping screws
Should the rear enclosure be required
drill holes B x4 - 3.5mm, mount using No.8 50mm self tapping screws
W/O :- Date :-
T
ype
Gas Range Alarm
Flammable
T
oxic
Refrigerant
188mm
43mm
15mm
120 mm
SIDE VIEW
FRONT PANEL
REAR ENCLOSURE
To Previous Page
Loading...