To Next PageTo Next Page
Need help?Do you have a question about the GE Interlogix Simon 60-875 and is the answer not in the manual?
General| Category | Security System |
|---|---|
| Manufacturer | GE Interlogix |
| Model | Simon 60-875 |
| Type | Wireless Alarm System |
| Wireless Frequency | 319.5 MHz |
| Keypad | Integrated |
| Dimensions | 156 mm H x 210 mm W x 38 mm D |
Explains the use of Home Security buttons for arming and disarming sensors.
Details arming the system for intrusion/burglary protection.
How to disarm the system and check its current status.
Explains Exit Delay and Entry Delay for arming and disarming.
Various methods for arming the system based on sensor status.
Procedures for disarming and subdisarming the system.
Steps to temporarily disable specific sensors while the system is armed.
How to activate emergency calls for fire, police, or auxiliary assistance.
Describes alarm sounds and light signals for fire, intrusion, and emergency.
Discusses concerns about accidental alarms and how to prevent them.
Tips and practices to avoid triggering accidental alarms.
Table of phone commands to control panel functions.
Basic control functions like arming, disarming, and checking status via touchpads.
How to add or delete system options and features.
Details on master, user, and panic codes for system operation.
Step-by-step guide to changing and deleting access codes.
Describes conditions for AC power failure and backup battery operation.
Explains system battery failure and troubleshooting steps.
Covers sensor failure, low battery, open, and tampered conditions.
Explains issues with the system failing to communicate with the central station.
How to perform regular tests on individual sensors to ensure they are working.
Detailed instructions on how to perform sensor tests and interpret results.
How to test communication with the central monitoring station and pager.
A summary table of common system operations and how to perform them.
