GE 16 - Oven Control Features Details; Clean Pad Operation

GEAppliances.ca
Oven Control, Clock and Timer Features and Settings
A AUTOMATIC OVEN Light (on some models)
W This lights anytime the oven has been
programmed using the COOK TIME or
START TIME functions.
OVEN LIGHT or ~<* Pad
•
Touch this pad to turn the oven light on or off.
A -Pad
"" Short taps to this pad will decrease the time
or temperature by small amounts. Touch
and hold the pad to decrease the time
or temperature by larger amounts .
+Pad
•
Short taps to this pad will increase the time
or temperature by small amounts. Touch
and hold the pad to increase the time
or temperature by larger amounts.
CLEAN Pad (on some models)
Touch this pad to select the self-cleaning
function. See the Using the self-cleaning
oven section.
"
CLEAN Light
Flashes while in edit mode-you can change
the length of time for the self-clean cycle at this
point. Glows when the oven is in the self-clean
cycle. After the self-clean cycle, the light will turn
off. Unlatch the door.
IA. OFFPad
'1:1 Touch this pad to cancel ALL oven operations
except the clock and timer.
BROIL Pad
•
Touch this pad to select the broil function.
BROIL Light
Flashes while in edit mode-you can switch
from HI to LO BROIL at this point. Glows when
the oven is in broil mode.
Temperature Conversions
Indicator Lights (on some pads)
EDIT mode lasts several seconds after the last
pad press. START TIME and COOK TIME will be the
only pads lit if either of these options is selected.
(Example: START TIME is selected with BAKE-the
START TIME pad will remain lit until the clock
reaches the programmed time, at which point it
will turn off and the BAKE pad light will light up.)
Fahrenheit» 140 150 170 200 250 275 300 325 350 375 400 425 450475 500 525 550
~~ ro~~~~m~~m~~m~~~m~
Power Outage
Ifa flashing time is in the display, you have
To reset the clock, touch the CLOCK pad. Enter
experienced a power failure. Reset the clock.
the correct time of day by touching the + or - pads.
Touch the START/ON pad.
11