GE 16 - Page 46

C/)
c:
.2
tJ
.....,
2
C/)
c:
-
Using the clock, timer and convenience outlet. (on some models)
Not 01/ features are on 01/ models.
To Reset the Timer
If the display is still showing the time
If the remaining time is not in the display
remaining, you may change it by touching (clock, delay start or cooking time are in
the TIMER pad, then touch the + or - pads
the display), recall the remaining time by
until the time you want appears in the touching the TIMER pad and then touching
display.
the + or - pads to enter the new time
you want.
To Cancel the Timer
Touch the TIMER pad twice.
@
End of Cycle Tones (on some models)
TlDI
MINUTEIII(
Clear the tones by pressing the pad
of the function you are using.
OR
Power Outage
Ifa flashing time is in the display, you have To reset the clock, touch the CLOCK pad
experienced a power failure. Reset the clock. twice. Enter the correct time of day by
touching the + or - pads. Touch the
START/ON pad.
Convenience Outlet (on some models)
The 120V convenience outlet located
on the top of the backguard may be used
to plug in small electrical appliances.
To reset the circuit breaker. press
the switch located near the outlet
on top of the backguard.
When using the outlet. be sure that
the electrical cord does not rest on or near
a surface unit. If the surface unit is turned
on, the cord will be damaged.
16