GE 16 - Page 63

GEAppliances.ca
Possible Causes What To Do
Oven is not set to BROIL. • On models with a temperature knob, make sure you
turn it all the way to the BROIL position. On models
with a BROIL pad, make sure it is turned on.
Door not open to the broil stop • See the Using the oven section.
position as recommended.
Improper rack position • See the Broiling guide.
being used.
Control signals after
entering cooking time
or delay start
Display flashes "bAd"
then 'finE" with a
loud tone
Food being cooked in a hot pan.
Cookware not suited for broiling.
Aluminum foil used on the
broiling pan and grid has
not been fitted properly
and slit as recommended.
• Use the broiling pan and grid that came with your range .
Make sure it is cool.
• Use the broiling pan and grid that came with your range .
•
See the Using the oven section.
In some areas the power
• Preheat the broil element for 10 minutes.
(voltage) may be low.
• Broil for the longest period of time recommended
in the Broiling guide.
You forgot to enter a bake
• Press the BAKE pad and desired temperature or the CLEAN
temperature or cleaning time.
pad and desired clean time.
The installed connection
• Contact installer or electrician to correct miswire.
from the house to the unit
is miswired.
-
:l
lI)
tt
c:
n
g.
:l
lI)
g
:l
lI)
c:
(b
..,
~
o
~
33
3