29
Troubleshooting TipsInstallation Instructions
Customer Service
Operating InstructionsSafety Information
Rollers
The rollers have 3 purposes:
Rollers adjust so the door closes easily when opened about halfway.
[Raise the front about 5/8″ (15 mm) from the floor.]
Rollers adjust so the refrigerator is firmly positioned on the floor
and does not wobble.
Rollers allow you to move the refrigerator away from the wall for cleaning.
3
2
1
To adjust the rollers,
remove the base grille by pulling it out at the bottom.
Turn the roller adjusting screws
clockwise to raise
the refrigerator,
counterclockwise to lower
it. Use an adjustable wrench (3/8″ hex head bolt)
or pliers.
To replace base grille, align prongs on back of grille with clamps in cabinet and
push forward until grille snaps into place.
To Next Page
Loading...
Need help?
General
