GE 25007 - Troubleshooting; Remote Not Operating Device; Remote Not Operating Features; Red Indicator Blinks

14
Remote does not operate your device.
• Pressthedevicebuttonofthedeviceyou
wish to control.
• Programtheremotewithanewcode.
• Installnewbatteries.(Youmighthaveto
reprogram your remote after installing new
batteries.)
• Remotemaynotbecompatiblewithyourdevice.
Remote does not operate some features of
your device.
• Sometimesaparticularcodemightoperatesome
features but not all. Try programing remote with a
new code.
• Remotemaynotbeabletooperateallfeaturesof
your device or button names might be different
than your device.
Red Indicator blinks and stays on after you
program a product code.
• Remotedidnotacceptthecode.
• Trytoprogramthecodeagainortrya
different code.
Remote Code is not available for a device (e.g. TV/
VCR)
• Seesectionforcontrollingcombodevices.
For additional troubleshooting information please
visit www.jascoproducts.com
Troubleshooting