10
Programming Your Remote
Favorite Function
Allows user to program up to 10 of their favorite
channels for quick access.
Setup Favorite Function
1. Press and release the device button
(b-ray, dvr, tv, cbl, amp, aux). The
indicator light will blink once.
Note: User must select the device type
that controls the channels; for example
if a user has a cable box for controlling
channels, then this device button must
be selected to properly change the
channels on the cable box.
2. Press and hold the SETUP button for 2
seconds or until the red indicator light
turns on, then release the button.
3. Press and release the FAV button.
The red indicator will blink once and
remain on.
4. Press and release the numerical button
(0 – 9) that you will use for storing your
favorite channel. The red indicator will
blink once and remain on.
5. Enter the channel number you wish to
program, for example channel 4, 21,
4-1, 52-2.
6. Press and release the FAV button, the
red indicator will turn off. Your favorite
channel is now saved.
Using Favorite Function
1. Press and release the FAV button. The
red indicator light will turn on.
2. Press and release the programmed
button (0-9). The red indicator will blink
twice and the remote will send the code
for your pre-programmed channel.
To Next Page
Loading...
