GE 41567 - Using Your Remote; Master Volume Feature

10
Master Volume Feature
The Master Volume Feature allows you to select a
single device that the volume buttons always control.
For example, the remote can be in TV mode while
the volume buttons control the volume on your audio
receiver or sound bar instead of your TV.
Enabling the Master Volume Feature
1. Press and hold down the SETUP button
on the remote until the red light on the
remote control turns on. Release the
SETUP button. The red light
will remain on.
2. Press and release the device button
(tv, aud, etc.) on the remote for the
device you wish to control the volume.
3. Press and release the MUTE button.
4. Press and release the VOL+ button.
The red light will blink twice and
turn off.
Disabling the Master Volume Feature
1. Press and hold down the SETUP button
on the remote until the red light on the
remote control turns on. Release the
SETUP button. The red light will
remain on.
2. Press and release the device button
(tv, aud, etc.) programmed to control
the Master Volume Feature.
3. Press and release the MUTE button.
4. Press and release the VOL - button.
The red light will blink twice and
turn off.
Using Your Remote
tv
0l
v
tv
0l
v
setup
setup