7
Operating the Clock
EN
Snooze Alarm Operation
This operation allows extra sleep time af-
ter the alarm is on. The alarm will be off
by pressing SNOOZE until the snooze pe-
riod is over. Snooze function can be used
repeatedly up to 2 hours. After this, the
alarm will turn off until the next alarm
conditions are met. Set the “quiet” pe-
riod as follow:
1. Press and hold SNOOZE.
2. Press REV or FWD to set the “quiet”
period (the default time is 9 minutes)
from 1 minute to 30 minutes. Release
button, then, the “quiet” period is set.
Weekend cancel
If the weekend cancel function is acti-
vated, the alarm will be active during
MON to FRI, and inactive during SAT and
SUN. You can activate or deactivate this
function as follow:
To activate Weekend cancel function
• Press the Weekend cancel button once
(the red icon “Weekend Cancel” will ap-
pear.)
To deactivate Weekend cancel func-
tion
• Press and hold the Weekend cancel
button to cancel this function (the red
icon “Weekend Cancel” will disappear.)
Seconds Time Display
The unit may display in seconds.
1. Select LOCK in the SET switch.
2. Press REV or FWD to show seconds
display.
3. Release REV or FWD to return to the
hour and minute display.
7-4894 EN-US 1/6/03, 8:33 AM8
To Next Page
Loading...
Need help?
General
