3
Retractable Cord*
Cord Release Button*
Fabric Setting Display/
Automatic Shutoff Status Indicator
(see inset)
Temperature Selector/
Automatic Shutoff Reset Button
Blast of Steam/Spray Buttons
(see inset)
Water Tank Fill Hole
Soleplate
Self-Clean Button
Water Tank
Power On Light/Automatic Shutoff
Status Indicator
Heel Rest
Adjustable Steam
Know Your Iron
Parts and Features
1
2
3
5
6
4
5
7
6
Before First Use
• Steam vents should be cleaned before
first use. Prepare iron for steam iron-
ing, then iron over an old cloth for a
few minutes while letting the iron
steam. Press the Blast button several
times to clean the vents. Then follow
the Self-Cleaning instructions.
• Many irons spit or sputter during
the first few uses with tap water.
This happens as the steam chamber
becomes conditioned. This will stop
after a few uses.
• During first use of the iron, it may
appear to smoke. This will stop and
does not indicate a defect or hazard.
7
8
9
9
8
10
10
1
2
3
4
11
12
11
12
Spray
Blast
To Next Page
Loading...
