7
OPERATION
Cup & base Suitable for
Tall cup
(1) with
(3)
Small cup
Grinding base
(6) with
(8)
Warning: Always ensure the blending base (3) or the grinding base (8) is securely
screwed on and tightened onto the cup (1) or (6) before activating the appliance.
(5) to a wall outlet.
(1 or 6) with base (3 or 8) on the drive shaft (ill.
d
). To activate the
blender, align the tabs on the cup with the blending base or grinding base (3 or 8)
and twist clockwise until it locks in place (ill.
).
(5)
from the wall outlet before removing the cup (1 or 6) from the power base (4).
Hint: Operate the blender for only as long as needed to reach the right consistency.
Never use the blender for more than 3 minutes at a time. After use, let it cool for at least
3 minutes before you start using it again.
(1 or 6) around, so that the blending base (3) or grinding base (8) faces
upwards. Unscrew the blending base (3) or grinding base (8) of the cup.
(13) on the cup
(1 or 6) (ill.
).
Hint: Store any unused portions using the resealable lid (13) in the refrigerator.
small holes (10) or shaker lid with large holes (12) onto the cup (1 or 6) (ill.
g
).
(1 or 6) with the lip rings (9)
of the cup (ill.
h
).
111349-GE-10 (EN+ES).indb 7 09/03/2011 14:07
To Next Page
Loading...
