GE AEM18DQQ1 User Manual

About the controlson the air conditioner
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
NOTE:Thedisplayalways
showsthe roomtemperature
exceptwhen settingthe Set
temperatureor the Delaytimer.
Lightindicates the unit
is in the temperatureor
delaytime Set mode.
T_g_ Delay1-24hr
Delaytimer O
0 --Auto Cq_lp_- Decrease 0
-- High m Cool Mode select
Med u Energy Saver
-- Low iFan Onlg Fan speed
-- ('-Fan-_ &o 0_,,Speed_ d _#_ Decrease 0
Temperature
I set Increase
andDecrease
Lightindicatesthe
delay timer is set.
Air Conditioner Controls
Delaytimer Increase
I _ _ i _AutoFanon
II _t_ +_._i_ FanspeedIncrease
Remote Control
Controls
O Power Pad 0
Turns air conditioner on and off. When turned
on,the display will show the room temperature.
O Display
Shows the room temperature ortime remaining
on the Delaytimer. Showsthe Set temperature
while setting the temperature in Cool or Energy
Saver modes.TheSet light willturn on while
setting.
O emp Increase •/Decrease • Pads
Useto set temperature when in Cool or Energy
Saver mode. TheSetlight will turn on while
setting.
O elay Timer Increase • (4-I/Decrease • (-)
Pads
Eachtouch of the Increase • / Decrease •
pads on the unit or the Increase + / Decrease
- pads on the remote control willset the delay
time when using the Delay 1-24hr timer. The
Set light willturn on while setting.
O an Speed Pads
Useto set the fan speed to Low, Med, High
orAuto on the unit. NOTE:On the remote
control, use the fan speed Increase + /
Decrease - padsto set the fan speedsto Low,
Med or High. Usethe Auto pad to turn Auto
fan on.
0
Mode Pad
Useto set the air conditioner to Coo/, Energy
Saver or Fan Only mode.
Delay Pads/Delay 1-24hr Pad
Delay ON--When the air conditioner is off,it can
be set to automatically come on in 1 to 24 hours
at its previous mode and fan settings.
Delay OFF--When the air conditioner is on, it
can be set to automatically turn off in 1 to 24
hours.
How to set:
Pressthe Delay 1-24hr pad on the unit or the
Delaypad on the remote control. Eachtouch
of the Increase • / Decrease• pads on the
unit or the Increase + / Decrease - pads on
the remote control will set the timer in 1-hour
intervals.The Setlight will turn on while setting.
To review the remaining time on the Delay
1-24hr timer, press the Delay 1-24hr pad on
the unit or the Delay pad on the remote control.
Usethe Increase • / Decrease • pads on the
unit or the Increase + / Decrease - pads on the
remote control to set a new time if desired.
To cancel the timer, press the Delay 1-24hr pad
until the light on the Delay 1-24hr pad goes off.
Note: The default temperature reading on the display isdegree Fahrenheit (°F). To change the display to
degree Celcius (°C),press the Temp Increase • and Temp Decrease • buttons together and hold for :3
seconds. Repeat the process to change back to degree Fahrenheit (°F)
4

GE AEM18DQQ1 Specifications

General

Brand	GE
Model	AEM18DQQ1
Category	Air Conditioner
Language	English