GE Bently Nevada SCOUT200 Series User Manual

SCOUT200 Series Quick Start Guide 1
Bently Nevada* Asset Condition Monitoring
SCOUT200 Series Quick Start Guide
OVERVIEW
 SCOUT220-IS & SCOUT240-IS are intrinsically safe portable data collectors designed for hazardous
environments. The data collectors are ATEX Zone 1 and CSA Class 1 Zone 1 compliant.
 COMMTEST220 & COMMTEST240 are portable data collectors that cater to non-hazardous environments.
 The industrial handheld is an intrinsically safe interface device.
 S1 Collector app runs on the industrial handheld.
Important Safety Information
Scout200 Series uses an accelerometer with a
powerful magnet base. Do not use your data collector
before reading the product safety advisory in the
Installation & Operation Manual.
Part Number: 109M1270-01
Rev. C

GE Bently Nevada SCOUT200 Series Specifications

General

Brand	GE
Model	Bently Nevada SCOUT200 Series
Category	Data Loggers
Language	English

Summary

Overview of SCOUT200 Series

Intrinsically Safe SCOUT220-IS & SCOUT240-IS

Intrinsically safe data collectors for hazardous environments (ATEX Zone 1/CSA Class 1 Zone 1).

COMMTEST220 & COMMTEST240 for Non-Hazardous

Portable data collectors designed for non-hazardous environments.

Industrial Handheld and S1 Collector App

Intrinsically safe interface device for the S1 Collector app.

Important Safety Information

Safety Advisory and Manual Reference

Read manual before use; device has magnetic base accelerometer.

Fundamentals of Device Operation

Device Charging and Attachment

Instructions for charging the device and attaching strap or belt clip.

Powering On and Device Indicators

Procedure for powering on the device and understanding buttons and LED status indicators.

Connectors and S1 Collector App Setup

Device Connectors for Power and Sensors

Description of DC, LEMO (CH1/CH2+), and TACH connectors for device connectivity.

S1 Collector App Installation Guide

Steps to download and install the S1 Collector app from the GE BN Technical Support Portal.

Pairing the S1 Collector App

Instructions for pairing the S1 Collector app on the handheld with the SCOUT200 series device.

S1 Collector App Main Functions and Sync

Main App Functions Overview

Overview of navigation and core app functions including ROUTES, MEASURE, SYNC, and SETTINGS.

Data Synchronization via USB Tethering

Steps for synchronizing data using a USB tethering connection to System 1.

Data Synchronization via Wi-Fi

Procedure for synchronizing data over a Wi-Fi network connection.

Recording a Route

Route Configuration and Setup

Selecting routes, database, folder, and configuring recording mode for route-based measurements.

Sensor and Measurement Setup

Assigning sensors to channels and preparing for measurements during route recording.

Starting and Managing Route Recordings

Initiating route recording, managing measurement summaries, and navigating between points.

Off-Route Recording Procedures

Measurement Types and Configuration

Available off-route measurement types (Spectrum, Demodulation, 6 Pack, etc.) and configuration.

Performing Off-Route Measurements

Using drill-down menus and performing operations like Data Types, Pause, and Save during recording.