Installation Instructions
DIMENSIONS All measurements are given with leveling leg fully retracted,
69
CYE,CWE Only
......... 35%" ..............
31¼"
CFE Only
......... 3 53/4" ...............
Case Depth w/o
Doors 29 _" CFE
24 %" CYE
23 ¼" CFE
¼" CYE
Height from
floor to hinge
cover top 69 7/d'
Additional Dimensions
CFE CYE,CWE
Overall Height to Top of 697A'' 697A''
Hinge Cover
Height to Top of Cabinet 69" 69"
Case Depth withoutDoors _ 29%11_ 24%
Overall Exterior Case Width 35sA'' 35sA''
Overall Exterior Depth 36X" 31X"
Doors/Drawers with Handles
MOVING THEREFRIGERATOR
• Using the chart below determine ifthe width ofyour passageway can accommodate the depth of the refrigerator,
Ensureyou have clearance to prevent damage to the refrigerator before safely moving it to the final location,
• If passageways are large enough to accommodate the refrigerator without removing the handles skip to Step 6, Leave
tape, film and all packaging on doors until the refrigerator is in the final location,
• NOTE:Usea padded hand truck or moving straps to move this refrigerator. Placethe refrigerator on the hand truck
with a side against the truck. We strongly recommend that two people move and complete this installation.
If your model number starts with CFE
Fully l_movlng Removing Casev_ Case only
Ass_nl_ed Handles LH Door FzSlides (no hl_es}
36.25" 35.25" 33.75" 30.25 '_ 29,375"
Remove d_ parts In €_rder untlldlmenslon Is less than _penlng
If your model number starts with CYE, CWE
Full_
Assembled
3_25"
Removing Removing Handles
Removing LHDoor (OWE) C_ew/ Caseonly
Handles__ y FzSli_es {no hinges)
3U.ZS" 28.75" 25.25" 24.375"
Remove door petts In order until dimension Is less than opening
22
To Next Page
Loading...
